SERVICE & MAINTENANCE TRAINING

LONE STAR SUPPORT AFTER THE SALE

Lone Star offers in depth and hands on training classes for operators and maintenance staff that want to understand the equipment and how it is affected by the process.

Lone Star training center brings relevant equipment examples and includes 4 hours of classroom combined with 4 hours hands on training.

Join the Lone Star Team for quarterly training in a small group or private class.  To join the email notification list of the next scheduled class email  training@lonestarblower.com

Space is limited and the class fills up fast. There will be a minimum of 5 students to have the class, with a max of 15.

There are different classes each lasting one day, people can just take one or all three as appropriate.  This training is on technology and will apply to other brand centrifugal blowers and compressors just as much as new Lone Star models.  Most people who take the class do not have a Lone Star!

  • Held at Lone Star Quarterly
  • 4 Hour Class Room
  • 4 Hour Hands On
  • Limited to 15 People (Minimum 5)


Lone-Star-Service-Maintenance-Training-2

April 18 July 18 October 17
1. Blower 101
a. Cause & Effect Fundamentals
b. Operation & Function
c. Identify Components
2. Learn Start Up & Shut Down Operation Procedures
a. Alignment
b. Vibration Analysis (basic)
c. Start Up Procedures
d. Shut Down Procedures
3. Understand & Perform Basic Maintenance
a. Bearing Lubrication
b. Filtration
c. Vibration & Alignment Checks
4. Perform Recommended Basic Repair
a. Bearing Change
b. Seal Changes
c. Coupling Changes
5. Trouble Shooting/Identify Problems
a. Cause and Effect
b. Mock Scenarios
6. Final Test!
Yes this will be graded and must pass to receive a certificate!
April 16 July 16 October 15
1. Blower 101
a. Cause & Effect Fundamentals
b. Operation & Function
c. Identify Components
2. Learn Start Up & Shut Down Operation Procedures
a. Alignment
b. Vibration Analysis (basic)
c. Start Up Procedures
d. Shut Down Procedures
3. Understand & Perform Basic Maintenance
a. Bearing Lubrication
b. Filtration
c. Vibration & Alignment Checks
4. Perform Recommended Basic Repair
a. Bearing Change
b. Seal Changes
c. Coupling Changes
5. Trouble Shooting/Identify Problems
a. Cause and Effect
b. Mock Scenarios
6. Final Test!
Yes this will be graded and must pass to receive a certificate!
April 17 July 17 October 16
1. Blower 101
a. Cause & Effect Fundamentals
b. Operation & Function
c. Identify Components
2. Learn Start Up & Shut Down Operation Procedures
a. Alignment
b. Vibration Analysis (basic)
c. Start Up Procedures
d. Shut Down Procedures
3. Understand & Perform Basic Maintenance
a. Bearing Lubrication
b. Filtration
c. Vibration & Alignment Checks
4. Perform Recommended Basic Repair
a. Bearing Change
b. Seal Changes
c. Coupling Changes
5. Trouble Shooting/Identify Problems
a. Cause and Effect
b. Mock Scenarios
6. Final Test!
Yes this will be graded and must pass to receive a certificate!