MORE THAN ONTARIO SERVICE – LONE STAR IS YOUR OEM REPLACEMENT FOR BLOWERS & COMPRESSORS
Toronto, Ottawa, Mississauga

If your company is located in the Province of Ontario and is in need of blower OR compressor
service, parts, repair, or rebuild, call our experts now at 832-532-3112 or submit a request for quote.

Factory Service Overview:

Lone Star manufactures the most advanced centrifugal blowers and compressors in the world, but also offers factory service and repair for your existing equipment better than the OEM!

Field Service Overview:

Lone Star Manufactured Products:


We provide parts and services for the following
blower and compressor brands.

Click on your blower & compressor manufacturer and scroll down to your model number
(if you do not see your specific brand or model please call our experts now at 832-532-3112 or submit a request for quote.)

Single Stage Blowers

Multistage Centrifugal Blowers

Multistage-Blower-Lone-Star-Blower-1000x777

Centrifugal Compressors

GC-Process-Air-Compressor-Lone-Star-Blower-1000x1000-1


Lone Star manufactures the blowers and compressors you want AND takes care of the units you have! We are not your typical repair center!

Multistage Centrifugal Blower Solutions for Your Plant or Facility
Centrifugal Blower & Exhauster Solutions for Your Plant or Facility
Centrifugal Compressor Solutions for Your Plant or Facility


testing-capabilities
testing-capabilities 2

OVERHAUL AND REPAIR

Lone Star Overhaul Repair Compressor GearsAs a blower & compressor manufacturer, our factory specialists are trained in various blower technologies. Our repair process starts with a detailed disassembly and inspection. Beyond a repair, our application engineers work to find out the cause of failure and provide solutions to avoid future downtime.

All repaired or replaced products leave our factory with a same-as-new warranty and are fully run tested to maximum power and pressure to ensure maximum reliability.


Common reasons equipment is overhauled:

  • Process/Product buildup internally
  • Surge/Bearing failure
  • Locked Rotor
  • High Vibration
  • Flooded by Water
  • Improper Maintenance

Fast Turn Around Time

Our large stock of Lone Star manufactured parts means faster turnaround for Hoffman, Lamson, Gardner Denver, Atlas Copco, HSi, Turblex, Howden, Siemens, Roots, Continental, Hibon, Spencer, and National Turbine, Ingersoll Rand, FS Elliott, Atlas Copco, Sullair (IHI), and Hanwha Samsung centrifugal blowers and compressors*.  Click to find your brand and model.  A  full 1 year same as new warranty applies to all overhauls.

Well-trained and expert technicians

Lone Star experienced technicians can not only offer field service but complete preventative maintenance programs as well, including complete troubleshooting and repair capabilities of the entire system from the controls (PLC) to all actuators or sensors.

Repair Process

Root Cause Analysis:

Detailed disassembly and inspection procedures as well as material root cause analysis can help determine causes of failure and prevent new failures. Lone Star manufactures all parts for these blowers and compressors to allow fast and efficient services.

Complete Testing:

Our test stand can fully mechanically run blowers up to 4,000 hp. On site capabilities for Balancing , Vibration analysis, complete engineering service, positive material identification, and more. See our complete testing capabilities.

Performance Testing:

We offer ASME PTC-10 performance testing for blowers to offer positive proof of performance when needed.

Rerate Your Blower:

We can re-rate performance of your blower by changing, adding or removing impellers, gear ratios, impeller cuts, or adapting a new control system for your existing blower.


lone-star-repair-process

Our technician arrives with all tools and supplies to completely maintain your unit:

• Class 1 or Class 2 type services for integrally geared turbo blowers
• Annual or Semiannual services for multistage centrifugal blowers
• Vibration Analysis
• Power Quality Analyzer
• Laptop with Interface Software to Allen Bradley or Siemens PLC
• Laser Alignment
• Oil Sample and Analysis
• Complete lubrication changes with disposal



PERFORMANCE CHANGE (RE-RATE)

Re-rates are changing the performance of the equipment.
Majority of re-rates keep the same dimensions.

Increasing-Pressure

Increasing-Pressure

Re-rates (also known as Performance Change or Change Performance) are changing the performance of the equipment. Majority of re-rates keep the same dimensions.

80% are not sized properly. [80% of what are not sized properly?]

Re-rates are changing the performance of the equipment. Majority of re-rates keep the same dimensions.

Common reasons units are re-rated:

• Increase or Decrease Flow
• Increase pressure rise
• Increase turndown capability
• Increase energy efficiency

Geared Turbo are re-rated:

• Change Gear Set
• Cut Down Impeller
• Add VFD and Controls

Multistage Turbo are re-rated:

• Change Impeller Mix
• Add or Delete Stages
• Change Control to VFD

ReRates-Performance Chart

Lone-Star-ReRates-Performance

Contact Lone Star Turbo


Centrifugal Blower & Compressor Service Menu

Lone Star manufacturers and stocks blower and compressor parts for Hoffman Parts*, Lamson Parts*, Gardner Denver Parts*, HSi Parts*, Atlas Copco Parts*, Howden Parts*, Siemens Parts*, HV-TURBO Parts*, Turblex Parts* Single Stage and Multistage Turbo Blowers.

Our in-stock blower parts and compressor parts include:

  • Blower Bearing Kit
  • Blower Bearing & Seal Kit
  • Blower Repair Kit
  • Blower Seals Kit
  • Blower Bearing Housings Kit
  • Blower Gears Kit
  • Blower Impellers Kit

  • Blower Shafts Kit
  • Blower Cast Iron
  • Blower Rotating Assembly
  • Blower Coupling Kit
  • Blower Gasket Kit
  • Blower Spacers Kit
  • Blower Valves Kit
  • Blower Actuator Kit

Call an Aftermarket Parts Specialist now at 832-532-3112 or submit a request for quote to Place Your Order Today.


FACTORY SERVICE CAPABILITIES
Worldwide Repair
Performance Testing ASME PTC13, PTC10, ISO 5389, API
Emergency Response Team
Test Stand to 6000 hp / 4,500 kw – 13.8kv to 380v / 60-50hz
40 Ton Cranes
Hydro Pressure and Leak Testing
Overspeed Testing
Positive Material Identification – XRF or OES
Reverse Engineering – Laser Scan
Dynamic Balancing
ASME Section 9 Welding
Sand Blasting and Painting
Specialized Baked-on Coatings
Vibration Analysis
Lubricant Analysis
Rotor Dynamics
Change Performance
Aerodynamic Analysis
Torsional Analysis
FACTORY SERVICE CAPABILITIES
Bearing Analysis
Overhauls
Operator and Maintenance Training
3D Modelling & Design
Computational Fluid Dynamics
Finite Element Analysis
Balancing
Magnetic Particle
Ultrasound
Sound Testing
Root Cause Analysis
Liquid Penetrant
Full Load Test Facility
Hydrostatic Testing
Overspeed Testing
Performance Test ASME, API, ISO
Positive Material Identification
Sandblast and Paint
Door-to-Door Service
RS Logix, Siemens, Modicon, Other Interface Software
Predictive Maintenance
FIELD SERVICE
System Audits
Preventative Maintenance
On-Site Repair
Troubleshoot & Root Cause Analysis
Control System Services
Software Upgrades
Vibration & Power Analysis
Laser Alignment
Start-up & Installation

PRODUCTS
Rental Blowers
Rental Compressors
Rental Dryers
Lone Star Parts
Star Lube – Lubricants
Lone Star Control Systems
Lone Star New Blowers
Lone Star New Compressors
Remanufactured Replacements


Lone Star specializes in dynamic compression of geared, gearless and multistage centrifugal blowers and compressors from   Hoffman, Lamson, Gardner Denver, Atlas Copco, HSi, Turblex, Howden, Siemens, Roots, Continental, Hibon, Spencer, National Turbine, Ingersoll Rand, FS Elliott, Atlas Copco, Sullair (IHI), and Hanwha Samsung and other brands*. 



Services, Part, & Repairs in the Americas & Beyond:

Lone Star Blower’s Factory Headquarters is in Houston, Texas and is equipped to provide single stage and multistage turbo blower, and compressor service, parts, repair, and rebuild services throughout North America and South America.

Click on your State, Providence, or Territory below to learn how we can assist you!


GC GEARED COMPRESSOR
Air, Gas, Pressure
Power: 200 hp – 13,000 hp
140 kW – 10,000 kW
Flow: 1,250 cfm – 350,000 SCFM
2,100 m3/h – 600,000 m3/hr
Pressure: 30 – 1,100 PSI
2 bar – 80 bar
API 614/617/672

GB SINGLE STAGE GEARED
Air, Gas, Pressure, Vacuum
Power: 100 – 6,000 HP
75 – 4,500 kW
Flow: 1,000 – 88,000 SCFM
1,700 – 150,000 nm3/h
Pressure: 2 – 35 PSI
0.1 – 2.4 bar
API 617/672

MC MULTISTAGE BLOWER
Air, Gas, Pressure, Vacuum
Power: 20 – 3,500 HP
15 – 2,500 kW
Flow: 300 to 45,000 SCFM
500 to 75,000 nm3/h
Pressure: 2 – 25 PSI
0.1 – 1.7 bar

DT HIGH SPEED TURBO
Air, Pressure
Power: 20 – 500 HP
15 – 375 kW
Flow: 150 – 15,000 SCFM
250 – 25,000 nm3/h
Pressure: 2 – 20 PSI
0.1 – 1.4 bar

We Rent The Equipment You Need
Centrifugal Compressor
PD Blower
Multistage Turbo
High-Speed Gearless Turbo
Single Stage Geared Turbo
Complete Packages
Direct Replacement Drop-In
Starters and Control Panels
Accessories

CONTROL SYSTEMS
sLOC™ Local Control Panels for Blowers and Compressors
sMAC™ Process and Sequencing
Master Control